![](images/Installation-00.jpg)
1- Mount the collectors by means of fasteners against the wall.
![](images/installation-01.jpg)
2- Mount the steel bracket together withthe plastic boxes against the wall.
![](images/installation-02.jpg)
3- Slide the screw and the compression ring over ENAPEX-pipe in this order.Pusth the cone into th pipe, and tighten the screw.
![](images/installation-03.jpg)
4- Push the brass connection piece together with the fitting and the pipe into the box,and fasten it by means of screwdriver.Afterwards,close the door.
![](images/Installation-04.jpg)
5- Push the pipe through the plastic wall-curve, and fix it to the floor.
![](images/Installation-05.jpg)
6- Connect the pipes to the collector using the ENAPEX-fittings.
click for more detailed pictures
|